Connecting to Water Supply

The water pressure required for the operation of the product is between 1-10 bars (0.1-1 MPa). 10 to 80 litres of water should be running from the tap in a minute in order for the product to function properly. If the water pressure is higher, install a pressure reducing valve.

WARNING

warning

WARNING:

Models with a single water inlet shall not be connected to the hot water tap. In such a case the laundry will get damaged or the product will switch to protection mode and will not operate.

Do not use old or used water inlet hoses on a new product. It may stain your laundry.

  1. Tighten all hose nuts by hand. Never use a tool when tightening the nuts.
  2. Open the taps completely after making the hose connection to check for water leaks at the connection points. If any leak occurs, turn off the tap and remove the nut. Check the gasket and tighten the nut carefully again. In order to prevent the water leaks and resultant damages, keep the taps closed when you do not use the product.