Connecting the Drain Hose to the Drain

  1. Attach the end of the drain hose directly to waste water drain, washbasin or bathtub.

  2. WARNING

    warning

    WARNING:

    Your house will be flooded if the water draining hose is dislocated during water draining. There is also a risk of burning due to the high washing temperatures! In order to prevent such situations and make sure that the product performs water intake and drain processes without any problem, fix the drain hose securely.

  3. Connect the drain hose to a minimum height of 40 cm and a maximum height of 100 cm.
  4. In case the drain hose is elevated after laying it on the floor level or close to the ground (less than 40 cm above the ground), water draining becomes more difficult and the laundry may come out excessively wet. Thus, follow the heights provided in the figure.

 

 

  1. To prevent the waste water to go back into the product again and to ensure easy drainage, do not immerse the end of the hose into the waste water or do not insert it into the drain for more than 15 cm. If it is too long, cut it short.
  2. The end of the hose should not be bent, it should not be stepped on and the hose must not be pinched between the drain and the product.
  3. If the length of the hose is too short, use it by adding an original extension hose. The length of the hose shall not be longer than 3.2 m. To prevent water leaks, always secure the connection between the extension hose and the draining hose of the product with a suitable clamp so that it does not come off and cause leaks.